Concrete steps and stoops with even risers and solid footing
Steps are where uneven concrete gets dangerous. We form new steps and landings with matching rise and run, a footing that won't settle away from the house, and a firm place for the handrail.

The most common step problem we see in Huntsville is the old front or back stoop that has pulled away from the house. It was poured on loose fill right against the foundation, the fill settled, and now the top step tilts outward with a gap at the threshold, or the whole block has cracked through. The second is steps built with uneven risers: one six-inch step, one eight-inch step, and a top step shorter than the rest. Feet expect every step to be the same, which is why that's where people trip.
New steps start with removing the old ones and checking what's under them. We dig a footing so the steps rest on firm soil rather than backfill, and where steps meet the house we tie in or isolate depending on the foundation. Forms are built from lumber with every riser the same height, generally around seven inches, and treads deep enough for a full foot, generally at least eleven inches, with a slight pitch so water runs off. Steel goes inside, and the landing at the top is sized so a storm door can swing open without anyone stepping backward off the edge.
Finish is a broom texture for grip, with a rounded nosing so the edges don't chip. If you want a handrail, we can set sleeves or plates for it in the concrete so the rail mounts solidly instead of into a drilled hole later. Stamped or stained steps are possible but need an anti-slip additive in the sealer. And if only the front walk or the landing is failing, we'll say so rather than replacing more than you need.
What the job includes
- Old steps removed. Broken stoops broken out and hauled off, with a look at why they failed
- Footing on firm soil. Steps carried on undisturbed ground, not loose backfill against the foundation
- Matching risers and deep treads. Every step the same height, with treads deep enough for a full foot
- Steel and a sized landing. Reinforced forms and a landing big enough for the door swing
- Grip and clean edges. Broom texture, rounded nosing, a slight pitch to shed rain
- Handrail ready. Sleeves or plates set in the concrete for a solid rail mount
Concrete steps and stoops prices in Huntsville
| Item | Typical 2026 range | What drives it |
|---|---|---|
| New concrete steps, 3–4 risers | $1,400 – $3,200 | Width, landing size, forming |
| Per additional step | $350 – $700 | Width and height |
| Remove old stoop | $300 – $900 | Size and steel inside |
| Landing only | $12 – $20 / sq ft | Height and forms |
| Handrail sleeves set in concrete | $90 – $200 | Number of posts |
Ranges are for budgeting in the Huntsville area. Your price is written after we measure, with base, steel, finish, tear-out and permit on separate lines.
On the job


Questions about concrete steps and stoops
Can you fix a step that pulled away from the house?
Sometimes it can be lifted back and sealed with leveling if the block is sound. If it's cracked through or the gap is big, replacement on a proper footing is the lasting fix.
How tall should each step be?
Around seven inches is comfortable and common, and every riser in a set should match within a small tolerance. We'll measure from the door threshold to the ground and divide it evenly.
Do you install handrails?
We set the sleeves or anchor plates in the concrete so a rail mounts solidly. The rail itself can come from a fabricator; we'll coordinate with them or suggest one.
Can new steps match my brick?
Concrete steps can be colored or faced, or a brick or stone veneer can be applied by a mason. We'll pour the concrete core to suit the finish you choose.
