Commercial concrete for businesses, churches and property managers
Parking pads, curbs, sidewalks, dumpster pads, ramps and loading aprons for offices, shops, churches and rental properties across Huntsville. Work scheduled around your hours, built to the City's standards.

Commercial flatwork is mostly the same craft as residential, with three differences: the loads are heavier, the public uses it, and the work has to fit around a business that's still open. A dumpster pad takes the front axle of a refuse truck dropping a full container every week; a thin slab breaks within a year. A parking pad behind a small office carries delivery vans and the occasional box truck. A sidewalk in front of a storefront has to meet accessibility slopes, and a ramp has to meet them exactly.
We build heavier work thicker and with more steel: six to eight inches at dumpster pads and their approaches, rebar on chairs, and joints laid out to the truck's path. Curb and gutter is formed or machine-placed to the City's profile. ADA ramps and walks are formed and checked with a digital level so running and cross slopes stay inside the limits, with detectable warning surfaces where they're required. For work in the right-of-way, like a driveway approach or a public sidewalk along the street, the permit and the City's standard drawings govern, and we'll handle the coordination with whichever office has jurisdiction.
Scheduling is half the job. We phase parking work so part of the lot stays open, pour early on weekdays or on weekends when it suits the business, and keep cones and tape around fresh concrete until it can take traffic. For property managers with a list of trip hazards across several buildings, we can walk the sites, rank the repairs, and price them in phases so the worst spots get fixed first.
What the job includes
- Heavier slabs where trucks load. Thicker concrete and rebar at dumpster pads, aprons and delivery areas
- Curb and gutter. Formed or machine-placed to the City's profile
- Accessible ramps and walks. Slopes checked with a digital level, warning surfaces where required
- Right-of-way work. Approaches and public sidewalks built to the permitting office's standard
- Phased around your hours. Sections poured so the business stays open, cones and tape until it's ready
- Multi-site repair lists. Trip hazards walked, ranked and priced in phases for property managers
Commercial concrete prices in Huntsville
| Item | Typical 2026 range | What drives it |
|---|---|---|
| Commercial flatwork, 5–6 in. | $9 – $14 / sq ft | Thickness, steel, access, phasing |
| Dumpster pad and apron, 6–8 in. | $3,500 – $9,000 | Size, bollards, demolition |
| Curb and gutter | $30 – $60 / linear ft | Profile, length, tie-ins |
| ADA curb ramp | $1,800 – $4,500 each | Demolition, warning surface, slopes |
| Sidewalk panel replacement | $400 – $900 per panel | Permit and traffic control |
| Night or weekend scheduling | Quoted per job | Crew and supplier hours |
Ranges are for budgeting in the Huntsville area. Your price is written after we measure, with base, steel, finish, tear-out and permit on separate lines.
On the job


Questions about commercial concrete
Do you work on weekends?
When it keeps a business open, yes. Concrete suppliers have limited weekend hours, so we plan those pours well ahead.
Can you handle the City permit for a right-of-way job?
We know which office handles approaches and sidewalks for Huntsville, Madison and the county, and the estimate shows the permit and who is responsible for pulling it.
How thick should a dumpster pad be?
We pour six inches at minimum and often eight, with rebar, and extend the heavy section out to where the truck's front wheels land, because that's where thin pads break.
Do you do large commercial projects?
Our focus is small and mid-size commercial flatwork: lots, pads, walks, ramps and repairs. For tilt-up buildings or structural decks, we'll tell you up front that it's not our work.
